we make welding fixture of polyethylene pipes

the producer OF JOINT STOCK COMPANY "sudakskoye RTP" (ul feodosiyskoye highway -1, g. pike-perch, AR the Crimea, 98000, tel./faks: 8 06566 30872) welding fixture of polyethylene pipes welding fixture of polyethylene pipes consists of: - bed with two stem guide, with four half-couplings, by the lever- rack mechanism of the displacement of half-coupling, by the screw mechanism of the compression of the ends of pipes; - cross-cut apparatus; - the disk of heating the ends of pipes; - key with the rachet of the delay of screw mechanism; - the hexahedral key of y0mm. for the delay is screw with the fillister heads; - fillister head screws (2yasht.) - change semirings (y'sht.) Adaptation is intended for the hot welding of the faces of pipes, prepared from soft polyethylene with the diameter of 90mm., yy0mm., y'0mm. Brief characteristic: - the overall dimensions: length - yshch00mm. width - "00mm. height - ya"0mm. - the total weight of adaptation - y20kg.; - weight without the cross-cut apparatus and the joint inserts - 8shchkg.; - the service personnel - 2 man. - the diameter of the pipes - 90mm. to be welded, of yy0mm., y'0mm.; - the thickness of the wall of the pipes - 6 to be welded - y0mm.; - the temperature of heating the ends of the pipes before the welding - 0°S; - the force of compression of the ends of pipes with the welding - 180 ya"; 220kg.; - the time of jointing the heated pipes - 0,3 s.; - thermal source - gas burner or soldering lamp; the technological process of welding the pipes: 1. preparatory stage: Adaptation has 2 complete sets of semirings d = of 90mm. and d = of yy0mm., which are attached into semirings d = of y'0mm. with the aid of it is screw with the fillister head and the hexahedral deepening under the key, depending on the diameter of the pipes to be welded. Pipes are plotted in the lower semirings of disconnectable coupling so that the ends looked on 30 - eshchmm., they are covered with upper lid and by the binding nuts of dogbolts. One ought not to make the effort of the delay of covers with too great. After moving apart clutches by lever up to distance of 110 -y20mm., is established